|
that much more hardward. I'd use my same mainsheet block. In fact I connected a wire between the two padeyes you see in your pic. and Shackled my mainsheet block to the cable. I lashed it on at the two ends, to hard to put a thimble in the padeyes and crimp on the boat. Just made it up a little short and lashed on both eyes. I only have a 3:1 purchase and does fine, been in winds 20 to 25 and could still sheet in alright. It goes out better without all that extra line.
Of course, I have the daysailor model which already has the two padeyes, I assume you have the cabin model. In which case you'll need a anchoring point in the back. YOu may want to check with Hutchinson/compac and see if the glass in the coaming is thick enough to just screw thru it. I'm not sure if the regular padeyes I have for the attachement are thru bolted or just screwed in. I can't see them. Compac may know. If its just screwed in, then it would be easy to duplicate the Daysailor model, like in the pic. you have.
|