Trailer Sailor Discussion Forum


Sell your boat for just $1

On my Clipper...

Posted By: Leroy CM23TK Gulf 29 PH Helena MT
Date: 2/9/08 9:25p.m.

Report: outside forum guidelines

In Response To: stemhead fitting on CM 32------WebKitFormBoundarybBHnnBHZHYnP8+vx (Dick------WebKitFormBoundarybBHnnBHZHYnP8+vx)

There is a piece of stainless strap that is tied to the bow and comes up under the stemhead fitting. I'd make sure that you had a good backing plate on the fitting, maybe cut in a triangular shape and fit up under the deck in the bow. There's a bunch of pull created from the furler and the wind on the jib, so I'd over-build if possible. BTW - what kind of roller furling?

Messages In This Thread

stemhead fitting on CM 32------WebKitFormBoundarybBHnnBHZHYnP8+vx -- Dick------WebKitFormBoundarybBHnnBHZHYnP8+vx -- 2/6/08 4:11p.m.
 On my Clipper...  -- Leroy CM23TK Gulf 29 PH Helena MT -- 2/9/08 9:25p.m.


To post in a Trailer Sailor forum you must be logged in.

 

Clipper Marine is maintained by SailboatOwners.com with WebBBS 5.12.