|
Help, My CM 26 is parked on a trailer that has 4"x4"'s wired to the frame and 1" stock used as shims to hold her up. Somebody remove the risers and brackets that normally hold up the 2"x6"'s. Could somebody please tell me the heigth these should be to the bottom of the 2"x6"'s, and the distance apart they should be, both fore and aft and athwartships. Why they pulled such a gofey move is beyond me, but it is what it is. I'm going to strap the boat down to the trailer and gingerly tow her to a ramp where I can launch her and let her live in the water until the welder can rebuild the risers and mounts. Thanks in advance for any help.
Rod
|