Clipper Marine Forum


Keel Winch Setup

Posted By: Mike Laine CM26 San Felipe, Baja California, Mexico
Date: 6/8/08 8:11p.m.

Report: outside forum guidelines

In Response To: Mexican keel winch (Greg CM26 Seattle CLM005771173)

http://mlaine.homeip.net/mike/winch/keel_winch_setup_index.html

Sorry guys but I just had a major loss of digitals, computers, and drives with backups due to a complete power failure in our city. Can't ever be prepared enough. With recovery programs I've been able to save a few pics and I'm in the process of rebuilding my own server where these are housed. Look at the pics and try to figure out what I've done. There is a metal plate on both sides of the center board where the winch is mounted with three visible bolts. There is a through plate on the step just before entering the cabin where the winch handle is placed. I also have a plexi through port to see the state of the keel cable connection. The turning pulley as seen here is mounted in the trunk at such an angle as to align the cable straight to the end of the keel. I've replaced the original (red) winch with a new Fulton. I don't know how long these pics will be up as I'm playing with different security measures for my webserver and sites.

Mike

CM26

Messages In This Thread

CM 26 -- Greg -- 5/29/08 9:33a.m.
My comments FWIW... -- Leroy CM23TK Gulf 29 PH Helena MT -- 5/29/08 12:51p.m.
Pricing -- Jake - Cm26 - Portland, OR -- 5/29/08 1:10p.m.
HULL ID number and what it means -- Greg -- 5/29/08 4:21p.m.
Yes indeedie, CLM0033M0674 -- Greg CM26 Seattle CLM005771173 -- 5/29/08 5:10p.m.
hull number -- JoeGusto/CM21#161 -- 5/29/08 7:51p.m.
I guess it must be 161... -- Greg CM26 Seattle CLM005771173 -- 5/30/08 6:47p.m.
It is 161. -- JoeGusto/CM21#161 -- 5/30/08 8:37p.m.
HIN standards -- Greg Gerhard -- 5/31/08 2:58p.m.
OK...here they are....and a blond tail as well -- JoeGusto/CM21#161 -- 5/31/08 7:10p.m.
photo2 -- JoeGusto/CM21#161 -- 5/31/08 7:11p.m.
Stripe? Serial? -- Greg Gerhard -- 6/1/08 8:56p.m.
yep Stripe....sorry -- JoeGusto/CM21#161 -- 6/1/08 9:28p.m.
serial # -- Steve Harrington -- 6/1/08 12:40p.m.
Greg CM26 Seattle ... Hull number ... -- J. R. CM21 #150 -- 6/4/08 3:09a.m.
Yes, #150 is accounted for -- Greg CM26 Seattle CLM005771173 -- 6/4/08 6:33a.m.
# -- dan radcliff cm21 -- 6/4/08 7:18a.m.
Hull # -- dan radcliff cm21 -- 6/5/08 6:30a.m.
Yes -- Greg CM26 Seattle CLM005771173 -- 6/5/08 8:31a.m.
Mexican origin CM26s -- Greg -- 5/31/08 2:55p.m.
re: mexican clipper -- Tom Schwab in Tampa clm 26 -- 6/1/08 7:10a.m.
keel re-engineering -- Steve Harrington -- 6/1/08 12:36p.m.
Great photos Steve! -- J. R. CM21 #150 -- 6/4/08 2:31a.m.
Sta-set -- Steve Harrington -- 6/4/08 6:41p.m.
keel cable -- Tom Schwab in Tampa clm 26 -- 6/7/08 5:24a.m.
Tom...... -- Pete Krogh -- 6/1/08 6:19p.m.
Tom, I agree with Pete, .....are such photos possible? -- J. R. CM21 #150 -- 6/4/08 1:57a.m.
re: mcdill -- Tom Schwab in Tampa clm 26 -- 6/7/08 5:36a.m.
Tom -- Pete Krogh -- 6/7/08 7:23a.m.
Tom in Tampa; More McDill, and "Please & Thanks" on E-mail pics -- J. R. CM21 #150 -- 6/9/08 12:38a.m.
wrecks -- dan radcliff cm21 -- 6/9/08 9:51a.m.
Mexican keel winch -- Greg CM26 Seattle CLM005771173 -- 6/4/08 6:44a.m.
RE: e-mail me -- Tom Schwab in Tampa clm 26 -- 6/7/08 9:51a.m.
 Keel Winch Setup   -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 6/8/08 8:11p.m.

 

Post Response

Your Name:
Your E-Mail Address:
Subject:
Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:
Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:

You may upload a file to our server by clicking here.

Optional Image URL:

Please these four characters into the field below. Do not enter spaces, just numbers and letters.
 

 

Clipper Marine is maintained by SailboatOwners.com with WebBBS 5.12.