Clipper Marine Forum

re:A frame

Posted By: Tom Schwab in Tampa clm 26
Date: 8/27/08 10:01a.m.

Report: outside forum guidelines

In Response To: Raising A Stable Mast (Vince)

Hi Vince, I've been reading all the comments on jin poles and a frames and
The only comment I want to make is, the two foreward shrouds should be hooked to the eye bolt on the top of the a -frame. This will pull the mast up
from the attachment points at the spreaders, leaving the forestay free to be attached once the mast is fully erect, having been erect 4 hours or not.
I use my purchase that functions as a preventer for down wind runs, not using the main sheet purchase, but either one will work. However the a frame
deal uses about 50- 55 feet of line on the purchase, that's why I don't use the main purchase. I did add two feet of stainless tubing to my mast crutch and added a roller at the top, I drilled it to make it go up high for raising the mast, and about a foot above the stern rail for transport, I found that the mast raises just a s well from either position. If you store the boat with it up higher it makes it easy to get in and out of the hatch.
My 2 cents worth, Tom cm26

Messages In This Thread

A Frame -- Vince -- 2/15/08 11:18a.m.

Raising a stable mast -- Greg CM26 Seattle CLM005771173 -- 2/16/08 12:58a.m.

Raising A Stable Mast -- Vince -- 2/16/08 7:32a.m.

More mast stepping details -- Greg CM26 Seattle CLM005771173 -- 2/16/08 11:40a.m.

Raising A Stable Mast -- Vince -- 2/16/08 12:36p.m.

Stays and Filling a Hole -- Dano Superior Pleasure CM30 Rainy Lake ON -- 2/16/08 4:58p.m.

Stays and filling a hole -- Vince -- 2/17/08 9:51a.m.

I use the -- Pete Krogh -- 2/17/08 11:04a.m.

I've done both A-frame and gin pole -- Henry CM26 -- 7/8/08 8:57p.m.

Amen -- Greg CM26 Seattle CLM005771173 -- 7/8/08 10:07p.m.

mast raising hardware issue -- Mike Pope -- 7/4/08 11:30a.m.

Main Shrouds are essential -- Greg CM26 Seattle CLM005771173 -- 7/6/08 8:47p.m.

Greg -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 7/7/08 7:58a.m.

Off Line -- Greg CM26 Seattle CLM005771173 -- 7/8/08 8:10p.m.

Greg, -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 7/9/08 9:38a.m.

re:A frame -- Tom Schwab in Tampa clm 26 -- 8/27/08 10:01a.m.

pictures? -- Jake - Cm26 - Portland, OR -- 8/27/08 10:15a.m.

A-frame -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 8/27/08 4:22p.m.

DQ and thanks for the photos... -- Leroy CM23TK Gulf 29 PH Helena MT -- 8/29/08 8:46a.m.

A-frame -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 8/29/08 10:09p.m.

A frame -- Mark -- 8/30/08 7:19p.m.

You're nuts! -- Henry CM26 -- 9/3/08 5:09p.m.

Dead man walking -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 9/3/08 7:06p.m.

Relief! -- HenryVG CM26 -- 9/4/08 9:48a.m.

A Frame -- Vince -- 8/28/08 8:27a.m.

New Gel-Coat Maintenance -- Eldon King -- 8/28/08 7:30a.m.

re:bottom job -- Tom Schwab in Tampa clm 26 -- 8/29/08 8:11a.m.

Water dripping... -- Leroy CM23TK Gulf 29 PH Helena MT -- 8/29/08 8:51a.m.

It sure is confusing -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 8/29/08 9:22a.m.

Keel dripping..... -- Steve Harrington -- 8/29/08 11:01a.m.

False bilge leaks -- Jake - Cm26 - Portland, OR -- 8/29/08 11:30a.m.

Gel coat -- Kevin, "the Flying Fox" -- 8/29/08 11:42a.m.

relinked -- Kevin, "the Flying Fox" -- 8/29/08 11:46a.m.

Crazy mixed up.... -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 8/29/08 7:37p.m.

That's a good question...... -- Steve Harrington -- 9/3/08 9:01a.m.

Post Response

Your Name:

Your E-Mail Address:

Subject:

Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:

Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:
You may upload a file to our server by clicking here.

Optional Image URL:

Please these four characters into the field below. Do not enter spaces, just numbers and letters.

Clipper Marine is maintained by SailboatOwners.com with WebBBS 5.12.