Clipper Marine Forum

False bilge leaks

Posted By: Jake - Cm26 - Portland, OR
Date: 8/29/08 11:30a.m.

Report: outside forum guidelines

In Response To: Keel dripping..... (link) (Steve Harrington)

I was having a major problem with that this year and last year also. I epoxied and did everything I could think of the stop water from coming in. I finally found the source and fixed it. The previous owner removed the locking bolt for the keel and filled in the hole with silicone. After who knows how long the silicone developed a small leak which worsened over the last year. I removed the old silicone and re-filled in the hole. No more leak...no more water in the V berth. One thing I found puzzling, there is a small nut on top of the keel trunk at the front. Directly in the center (from right to left) on top and only a few inches back from the front of the keel trunk. Anyone know what that is for?

Messages In This Thread

A Frame -- Vince -- 2/15/08 11:18a.m.

Raising a stable mast -- Greg CM26 Seattle CLM005771173 -- 2/16/08 12:58a.m.

Raising A Stable Mast -- Vince -- 2/16/08 7:32a.m.

More mast stepping details -- Greg CM26 Seattle CLM005771173 -- 2/16/08 11:40a.m.

Raising A Stable Mast -- Vince -- 2/16/08 12:36p.m.

Stays and Filling a Hole -- Dano Superior Pleasure CM30 Rainy Lake ON -- 2/16/08 4:58p.m.

Stays and filling a hole -- Vince -- 2/17/08 9:51a.m.

I use the -- Pete Krogh -- 2/17/08 11:04a.m.

I've done both A-frame and gin pole -- Henry CM26 -- 7/8/08 8:57p.m.

Amen -- Greg CM26 Seattle CLM005771173 -- 7/8/08 10:07p.m.

mast raising hardware issue -- Mike Pope -- 7/4/08 11:30a.m.

Main Shrouds are essential -- Greg CM26 Seattle CLM005771173 -- 7/6/08 8:47p.m.

Greg -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 7/7/08 7:58a.m.

Off Line -- Greg CM26 Seattle CLM005771173 -- 7/8/08 8:10p.m.

Greg, -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 7/9/08 9:38a.m.

re:A frame -- Tom Schwab in Tampa clm 26 -- 8/27/08 10:01a.m.

pictures? -- Jake - Cm26 - Portland, OR -- 8/27/08 10:15a.m.

A-frame -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 8/27/08 4:22p.m.

DQ and thanks for the photos... -- Leroy CM23TK Gulf 29 PH Helena MT -- 8/29/08 8:46a.m.

A-frame -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 8/29/08 10:09p.m.

A frame -- Mark -- 8/30/08 7:19p.m.

You're nuts! -- Henry CM26 -- 9/3/08 5:09p.m.

Dead man walking -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 9/3/08 7:06p.m.

Relief! -- HenryVG CM26 -- 9/4/08 9:48a.m.

A Frame -- Vince -- 8/28/08 8:27a.m.

New Gel-Coat Maintenance -- Eldon King -- 8/28/08 7:30a.m.

re:bottom job -- Tom Schwab in Tampa clm 26 -- 8/29/08 8:11a.m.

Water dripping... -- Leroy CM23TK Gulf 29 PH Helena MT -- 8/29/08 8:51a.m.

It sure is confusing -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 8/29/08 9:22a.m.

Keel dripping..... -- Steve Harrington -- 8/29/08 11:01a.m.

False bilge leaks -- Jake - Cm26 - Portland, OR -- 8/29/08 11:30a.m.

Gel coat -- Kevin, "the Flying Fox" -- 8/29/08 11:42a.m.

relinked -- Kevin, "the Flying Fox" -- 8/29/08 11:46a.m.

Crazy mixed up.... -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 8/29/08 7:37p.m.

That's a good question...... -- Steve Harrington -- 9/3/08 9:01a.m.

Post Response

Your Name:

Your E-Mail Address:

Subject:

Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:

Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:
You may upload a file to our server by clicking here.

Optional Image URL:

Please type these four characters into the field below. Do not enter spaces, just numbers and letters.

Clipper Marine is maintained by SailboatOwners.com with WebBBS 5.12.