Clipper Marine Forum

Gel coat

Posted By: Kevin, "the Flying Fox"
Date: 8/29/08 11:42a.m.

Report: outside forum guidelines

In Response To: Keel dripping..... (link) (Steve Harrington)

I have always thought Gel-coating and confusion went hand-in-hand! I've started working on my boat in hopes of having it in the water in a couple of weeks. I also am doing my bottom. Will paint under the water line with a Marine paint/Rustoleum combo I fixed up. I will use finishing resin and spray the upper surfaces. Hopefully! I spray tubs and showers, etc. Gel coating requires either an air inhibiting wax added which rises or covering the surface with plastic. Either way you are looking at sanding and polishing. Finishing resin dries hard to the touch, is glossy and can be tinted any color. I have started a blog for the work on the boat but don't have to many pics on there yet. Good luck on all of your repairs!

http://http://theflyingfox-clippermarine.blogspot.com/

Messages In This Thread

A Frame -- Vince -- 2/15/08 11:18a.m.

Raising a stable mast -- Greg CM26 Seattle CLM005771173 -- 2/16/08 12:58a.m.

Raising A Stable Mast -- Vince -- 2/16/08 7:32a.m.

More mast stepping details -- Greg CM26 Seattle CLM005771173 -- 2/16/08 11:40a.m.

Raising A Stable Mast -- Vince -- 2/16/08 12:36p.m.

Stays and Filling a Hole -- Dano Superior Pleasure CM30 Rainy Lake ON -- 2/16/08 4:58p.m.

Stays and filling a hole -- Vince -- 2/17/08 9:51a.m.

I use the -- Pete Krogh -- 2/17/08 11:04a.m.

I've done both A-frame and gin pole -- Henry CM26 -- 7/8/08 8:57p.m.

Amen -- Greg CM26 Seattle CLM005771173 -- 7/8/08 10:07p.m.

mast raising hardware issue -- Mike Pope -- 7/4/08 11:30a.m.

Main Shrouds are essential -- Greg CM26 Seattle CLM005771173 -- 7/6/08 8:47p.m.

Greg -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 7/7/08 7:58a.m.

Off Line -- Greg CM26 Seattle CLM005771173 -- 7/8/08 8:10p.m.

Greg, -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 7/9/08 9:38a.m.

re:A frame -- Tom Schwab in Tampa clm 26 -- 8/27/08 10:01a.m.

pictures? -- Jake - Cm26 - Portland, OR -- 8/27/08 10:15a.m.

A-frame -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 8/27/08 4:22p.m.

DQ and thanks for the photos... -- Leroy CM23TK Gulf 29 PH Helena MT -- 8/29/08 8:46a.m.

A-frame -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 8/29/08 10:09p.m.

A frame -- Mark -- 8/30/08 7:19p.m.

You're nuts! -- Henry CM26 -- 9/3/08 5:09p.m.

Dead man walking -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 9/3/08 7:06p.m.

Relief! -- HenryVG CM26 -- 9/4/08 9:48a.m.

A Frame -- Vince -- 8/28/08 8:27a.m.

New Gel-Coat Maintenance -- Eldon King -- 8/28/08 7:30a.m.

re:bottom job -- Tom Schwab in Tampa clm 26 -- 8/29/08 8:11a.m.

Water dripping... -- Leroy CM23TK Gulf 29 PH Helena MT -- 8/29/08 8:51a.m.

It sure is confusing -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 8/29/08 9:22a.m.

Keel dripping..... -- Steve Harrington -- 8/29/08 11:01a.m.

False bilge leaks -- Jake - Cm26 - Portland, OR -- 8/29/08 11:30a.m.

Gel coat -- Kevin, "the Flying Fox" -- 8/29/08 11:42a.m.

relinked -- Kevin, "the Flying Fox" -- 8/29/08 11:46a.m.

Crazy mixed up.... -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 8/29/08 7:37p.m.

That's a good question...... -- Steve Harrington -- 9/3/08 9:01a.m.

Post Response

Your Name:

Your E-Mail Address:

Subject:

Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:

Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:
You may upload a file to our server by clicking here.

Optional Image URL:

Please these four characters into the field below. Do not enter spaces, just numbers and letters.

Clipper Marine is maintained by SailboatOwners.com with WebBBS 5.12.