Clipper Marine Forum

Dead man walking

Posted By: Mike Laine CM26 San Felipe, Baja California, Mexico
Date: 9/3/08 7:06p.m.

Report: outside forum guidelines

In Response To: You're nuts! (Henry CM26)

Henry,
You missed the point. Leroy wanted to know if I used the shrouds to steady the mast, or used people to hold mast lines as it was stepped. On days I lower it on the water, I simply lower it to a height I can easily reach by using the a-frame from the pop top then step down into the cockpit and center it to the cradle releasing the mainsheet slowly. There is moderate sway when the mast is almost horizontal and holding it while single handing is the best way to land it. The great thing about the a-frame method is that I use both forward shrouds attached to the frame, leaving nothing to chance. Don't for a minute presume I take any chances .... I have a grandson I want to take sailing when he comes of age. There are plenty of ways to kill myself when sailing, this won't be one of them.
Cheers,
Mike

CM26

Messages In This Thread

A Frame -- Vince -- 2/15/08 11:18a.m.

Raising a stable mast -- Greg CM26 Seattle CLM005771173 -- 2/16/08 12:58a.m.

Raising A Stable Mast -- Vince -- 2/16/08 7:32a.m.

More mast stepping details -- Greg CM26 Seattle CLM005771173 -- 2/16/08 11:40a.m.

Raising A Stable Mast -- Vince -- 2/16/08 12:36p.m.

Stays and Filling a Hole -- Dano Superior Pleasure CM30 Rainy Lake ON -- 2/16/08 4:58p.m.

Stays and filling a hole -- Vince -- 2/17/08 9:51a.m.

I use the -- Pete Krogh -- 2/17/08 11:04a.m.

I've done both A-frame and gin pole -- Henry CM26 -- 7/8/08 8:57p.m.

Amen -- Greg CM26 Seattle CLM005771173 -- 7/8/08 10:07p.m.

mast raising hardware issue -- Mike Pope -- 7/4/08 11:30a.m.

Main Shrouds are essential -- Greg CM26 Seattle CLM005771173 -- 7/6/08 8:47p.m.

Greg -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 7/7/08 7:58a.m.

Off Line -- Greg CM26 Seattle CLM005771173 -- 7/8/08 8:10p.m.

Greg, -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 7/9/08 9:38a.m.

re:A frame -- Tom Schwab in Tampa clm 26 -- 8/27/08 10:01a.m.

pictures? -- Jake - Cm26 - Portland, OR -- 8/27/08 10:15a.m.

A-frame -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 8/27/08 4:22p.m.

DQ and thanks for the photos... -- Leroy CM23TK Gulf 29 PH Helena MT -- 8/29/08 8:46a.m.

A-frame -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 8/29/08 10:09p.m.

A frame -- Mark -- 8/30/08 7:19p.m.

You're nuts! -- Henry CM26 -- 9/3/08 5:09p.m.

Dead man walking -- Mike Laine CM26 San Felipe, Baja California, Mexico -- 9/3/08 7:06p.m.

Relief! -- HenryVG CM26 -- 9/4/08 9:48a.m.

A Frame -- Vince -- 8/28/08 8:27a.m.

New Gel-Coat Maintenance -- Eldon King -- 8/28/08 7:30a.m.

re:bottom job -- Tom Schwab in Tampa clm 26 -- 8/29/08 8:11a.m.

Water dripping... -- Leroy CM23TK Gulf 29 PH Helena MT -- 8/29/08 8:51a.m.

It sure is confusing -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 8/29/08 9:22a.m.

Keel dripping..... -- Steve Harrington -- 8/29/08 11:01a.m.

False bilge leaks -- Jake - Cm26 - Portland, OR -- 8/29/08 11:30a.m.

Gel coat -- Kevin, "the Flying Fox" -- 8/29/08 11:42a.m.

relinked -- Kevin, "the Flying Fox" -- 8/29/08 11:46a.m.

Crazy mixed up.... -- Pete Krogh, 1973 CM/4c, Nordland, WA -- 8/29/08 7:37p.m.

That's a good question...... -- Steve Harrington -- 9/3/08 9:01a.m.

Post Response

Your Name:

Your E-Mail Address:

Subject:

Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:

Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:
You may upload a file to our server by clicking here.

Optional Image URL:

Please these four characters into the field below. Do not enter spaces, just numbers and letters.

Clipper Marine is maintained by SailboatOwners.com with WebBBS 5.12.