|
Why do you want to use an asymmetric? Where are you going to attach the tack? Most boats with asymmetrics have a bowsprit, or some other way to extend the tack out in front of the boat. The boat was designed for a symmetrical spinnaker and I think you'll have more trouble with an asymmetric than it's worth. In principle, they seem easier to fly and jibe, but in practice they can be a real nightmare if you're not adept at it.
But if you insist...
Yes there are cleats and a turning block on each rail. See http://www.ruach.net/HarpFAQs.html#Spinnaker for an article I wrote some time ago describing all the hardware. Some of the part numbers have changed, but small hardware like Harken's Micro line work very well for me. You can control the lines from the the blocks on the aft corners too, if you prefer, but then you don't have the benefit of being able to cleat them.
Usually you only cleat the guy (assuming no major shifts) and you play the sheet constantly to retain proper trim. The trimmer must be facing forward so that he/she can always watch for breaks at the luff. I've never heard of any spinnaker trimmer facing backwards. As best I can tell, there's no way to properly trim any sail without looking at it!
In any event, welcome to our forum!
|