bridging the cockpit

Posted By: MrBill_26D_FLL
Date: 6/5/08 7:18a.m.

Report: outside forum guidelines

Hi there,
I'm going to cut some plywood this weekend, in order to make one very large bed for the cockpit.
I'm thinking of cutting the board to fit inside flush with the seats, and into 13" widths, (I think thats the storage width), for storage under the aft berth.
the idea is to sleep in the cockpit.
has anyone done this?
suggestions or photos would be appreciated.
(the board in this pic, not flush... I'm also wondering if the flush board will stay put without a ledge to rest on)

Messages In This Thread

bridging the cockpit -- MrBill_26D_FLL -- 6/5/08 7:18a.m.

You know what they say about opinions... -- Francois M26S Vancouver Island -- 6/5/08 9:18a.m.

Like this? -- Doug, 91', Mac26s, San Diego, CA -- 6/9/08 10:25a.m.

Cockpit bridging -- Bob McLellan -- 6/9/08 10:35a.m.

Teak edge rails... -- Mike Coon -- 6/9/08 11:27a.m.

Post Response

Your Name:

Your E-Mail Address:

Subject:

Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:

Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:
You may upload a file to our server by clicking here.

Optional Image URL:

Please type these four characters into the field below. Do not enter spaces, just numbers and letters.

Macgregor/Venture Forum is maintained by SailboatOwners.com with WebBBS 5.12.