MacGregor/Venture Forum

Our downhaul solution

Posted By: Chris & Lenore - Mac 26S - Teliki
Date: 6/16/08 11:22a.m.

Report: outside forum guidelines

In Response To: completely agree, I think I had the weed problem yesterday in very light air, (link) (Balazs (Mac26C GP, Alberta))

Go with 3/8 low stretch (polyester core or sta-set) and a Ronstan racing cam cleat. I use a loop in the end of the cord so I can pull really hard before cleating it down.
I had also tried adding a block but it wasn't needed once I had the proper line and cleat.
I read a post about stretching the line to "pre-load" it. Tried that - no good. If you can stretch it then the rudder will stretch it even more at 5 kts.
A heavy rudder won't do the trick either as the force when doing 5 kts is an order of magnitude higher than gravity acting on the weight.
Chris

Our sailing site

Messages In This Thread

Roundup problems w/ Idasailor rudder -- Eric J Mac 26D -- 6/15/08 5:01p.m.

Idasailor rudder stall -- Bob, '74 Venture 25, San Mateo FL -- 6/15/08 7:44p.m.

I'm a firm believer... -- Ramblin' Rod - Mac 26D - SeaQuell - Georgian Bay. -- 6/15/08 8:31p.m.

Roundup mitigation plan -- Eric J Mac 26D -- 6/16/08 9:44a.m.

Mast rake...rule of thumb -- Scott, Mac26D, Kennesaw, GA -- 6/16/08 10:09a.m.

"make sure your boat is level" -- Larry K. , Mac26D "Gustin Winds" L.Ontario -- 6/16/08 7:01p.m.

The only way to tune the rig is on the water. -- Ramblin' Rod - Mac 26D - SeaQuell - Georgian Bay. -- 6/16/08 8:55p.m.

must be on the water -- Bob s-v Watermark - Mac26S - Ottawa River - ON -- 6/17/08 5:57a.m.

Rule of thumb clarification... -- Scott, Mac26D, Kennesaw, GA -- 6/18/08 9:01a.m.

Be prepared to play - and it aint' easy -- Chris & Lenore - Mac 26S - Teliki -- 6/18/08 12:28p.m.

1 inch slack in downhaul = unmanageable tiller pressure -- Chris & Lenore - Mac 26S - Teliki -- 6/16/08 7:40a.m.

completely agree, I think I had the weed problem yesterday in very light air, -- Balazs (Mac26C GP, Alberta) -- 6/16/08 8:57a.m.

Our downhaul solution -- Chris & Lenore - Mac 26S - Teliki -- 6/16/08 11:22a.m.

down haul -- Ted Tobey M26c Marblehead ,Ma. -- 6/16/08 11:32a.m.

The picture in your post -- Scott, Mac26D, Kennesaw, GA -- 6/16/08 9:53a.m.

fwiw, mine works fine -- MrBill_26D_FLL -- 6/16/08 10:04a.m.

mine works but it could be better... -- Scott, Mac26D, Kennesaw, GA -- 6/16/08 10:53a.m.

Why it broke - and a few other comments -- Chris & Lenore - Mac 26S - Teliki -- 6/16/08 11:12a.m.

My PO bought the rudder so warranty doesn't apply.... -- Scott, Mac26D, Kennesaw, GA -- 6/18/08 9:03a.m.

Same here -- Ben -- 6/18/08 5:30p.m.

Rudder Discussion -- John S -- 6/23/08 3:06p.m.

light air sailboat -- Larry K. , Mac26D "Gustin Winds" L.Ontario -- 6/24/08 2:02p.m.

Light Air Sailbot -- John S -- 6/30/08 2:59p.m.

My take on the rudder issue -- MarkW -- 6/24/08 8:30a.m.

Post Response

Your Name:

Your E-Mail Address:

Subject:

Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:

Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:
You may upload a file to our server by clicking here.

Optional Image URL:

Please type these four characters into the field below. Do not enter spaces, just numbers and letters.

Macgregor/Venture Forum is maintained by SailboatOwners.com with WebBBS 5.12.