Trailer Sailor Discussion Forum
Home Forums Search Trailer Sailor Roster Chandlery Events Classifieds Resources About TSBB SBO Sites	Instructions/FAQ | Rules & Etiquette | Edit Profile | Forum Login View Thread | Post Response | Return to Index | Read Prev Msg | Read Next Msg | Check deck attachments - important!!!! Posted By: Chris & Lenore - Mac 26S - Teliki Date: 4/25/09 8:59a.m. Report: outside forum guidelines In Response To: Measurements (pic) (Doug91mac26s) After raising/lowering Teliki's mast several times I got around to inspecting the attachments from the underside. The bolts had pulled halfway through!!! They now have decent backing plates. Also - if you have roller furling, check the upper terminal. On a CDI it's hidden under the foil. When I checked Teliki, there were broken strands. Chris

Our sailing site

Messages In This Thread

Mast raising system/cabin leaks -- Paul Mitchell -- 4/25/09 4:41a.m.

Mast raising -- Bob McLellan, Mesa AZ -- 4/25/09 6:02a.m.

Followup -- Bob McLellan, Mesa AZ -- 4/25/09 6:11a.m.

Mast raising -- James Bielinski -- 4/29/09 5:25p.m.

Mast Raising -- James Bielinski -- 4/29/09 5:31p.m.

Here is the factory picture.... -- Sumner -- Mac 26S -- Blanding, UT -- 4/25/09 6:11a.m.

I elected not to drill........ -- John -- 4/25/09 7:06a.m.

Leaks -- Mike "Mikabee" Mac26s Victoria, Tx -- 4/25/09 7:14a.m.

Leaks -- Paul Mitchell -- 4/25/09 8:28a.m.

Leakage points we had - now only dust on the bilge -- Chris & Lenore - Mac 26S - Teliki -- 4/25/09 8:51a.m.

And ALWAYS... the chainplates -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 4/26/09 4:54a.m.

Right - forgot that one - sides and front. -- Chris & Lenore - Mac 26S - Teliki -- 4/26/09 6:21a.m.

Measurements -- Doug91mac26s -- 4/25/09 7:38a.m.

By the way... -- Doug91mac26s -- 4/25/09 8:00a.m.

 Check deck attachments - important!!!!   -- Chris & Lenore - Mac 26S - Teliki -- 4/25/09 8:59a.m.

RE: cabin leakage (during storage) -- Doug91mac26s -- 4/25/09 8:32a.m.

I just installed a system on mine. -- Mike Coon 26S -- 4/27/09 10:20a.m.