Trailer Sailor Discussion Forum


Small Craft Advisor - the magazine for the small boat sailor

Thanks for the comments... And a philosophical meandering...

Posted By: Sam Hunter, '93 Mac26S, Atlanta & Pensacola
Date: 5/7/09 5:51a.m.

Report: outside forum guidelines

In Response To: Very Nice! (pic) (mr bill)

And no, I do not mind at all if someone thinks some of my ideas are worth borrowing. Truth is, most of them are taken from ideas others have already contributed, or at least are modifications of ideas that came from others.

I know that some ideas that really were original with me have also occurred independently to others. I especially like those ideas for the variations, and the reasons for variations, between different folks.

One of the reasons I wanted a "mass produced" boat is that there would be sources of answers, ideas, solutions, and questions that are just not available with boats produced in small numbers. I've been a frequent visitor (and hopefully have contributed some value) on TSBB and the Seaward and Mac boards for a long time, and feel I have gotten much more than I have contributed.

I started a photobucket setup a while back, seemed pretty straightforward, so I'll probably go back and give it another shot.

Obviously, I am failing to explain something with the furler support / "sprit" (is that the right term for something that extends from the pulpit rather than the deck?). It makes perfect sense to me, but that never means that I am clearly expressing things to others. Are you looking for "how" or "why" or ... whatever? Let me know and I'll try to be more clear.

Also, I think it was you that had the engine on the starboard side. Anyway, someone posted here with a pic that had the boarding ladder on the port side, at the motor well, and the engine on the starboard side, at the lazarette.

I have been trying to solve some stern anchoring issues for a long time now, and seeing that pic was like a blinding flash of insight into the obvious!!!

Haven't worked out the details, heck, haven't even given it significant thought yet, as I am "projected out" and have to be ready for the Florida 120 in a week, but that has promise as a solution to several problems / issues that I want to solve.

So, thanks again for the comments, I will try to get more stuff posted, but most of all, thanks to all those from whom I have received so many ideas and solutions.

Messages In This Thread

This may be one of my truly wierd ideas!!! A bow boarding ladder. -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 5/3/09 4:02p.m.
Stowed / Up position -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 5/3/09 4:11p.m.
Like the ladder a lot! -- Scott Widmier, Mac26D, Kennesaw, GA -- 5/4/09 4:24a.m.
Sam, request for top view pic -- MrBill_26D_fll -- 5/4/09 7:09a.m.
OK, I'll try to get one tomorrow -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 5/4/09 5:10p.m.
OK, this one is from above -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 5/5/09 10:49a.m.
And a view from the front... -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 5/5/09 10:54a.m.
thanks, and more questions -- mr bill -- 5/5/09 2:26p.m.
OK, I'll try to answer... (and notes on some things that did NOT work) -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 5/5/09 4:45p.m.
Oh, yeah. I am also carrying the additional req'd CG stuff -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 5/5/09 4:57p.m.
Very Nice! -- mr bill -- 5/6/09 2:27p.m.
 Thanks for the comments... And a philosophical meandering...   -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 5/7/09 5:51a.m.
rear anchor roller -- MrBill_26D_fll -- 5/7/09 7:34a.m.
Not sure if reversing engine / ladder is easier in/out, BUT... -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 5/7/09 8:21a.m.
Nice asymmetrical! -- Balazs (Mac26C GP, Alberta) -- 5/7/09 8:49a.m.
classic shute dim's -- MrBill_26D_fll -- 5/7/09 9:48a.m.
Believe it or not, its the factory std issue. -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 5/7/09 10:20a.m.
Wow, I'd love to see some closeup pics of your setup, especially of this: -- Balazs (Mac26C GP, Alberta) -- 5/7/09 10:45a.m.
26S with an M asymmetrical -- Bob s-v Watermark - Mac26S - Ottawa River - ON -- 5/7/09 12:03p.m.
River boat -- Keith Nuttle -- 5/4/09 8:58a.m.
Actually, those front ramps on riverboats is where I got the original idea. -- Sam Hunter, '93 Mac26S, Atlanta & Pensacola -- 5/4/09 5:08p.m.


To post in a Trailer Sailor forum you must be logged in.

 

Macgregor/Venture Forum is maintained by SailboatOwners.com with WebBBS 5.12.