dagger board

Posted By: AJ
Date: 4/29/08 7:51p.m.

Report: outside forum guidelines

In Response To: thanks (Byron)

I have the same problem. I use a 2" thick block of very hard wood (like purple heart) and a 5 lb mallet to tap it down. There is not much room to swing a hammer so I like the heavier tool. I just did this about 2 weeks ago and it probably took 50 blows but, I did not damage the PVC pipe.
Good luck and be gentle and firm.

Messages In This Thread

N 24 spars -- AJ -- 4/23/08 6:08a.m.

Daggerboard -- Byron -- 4/28/08 9:40a.m.

Daggerboard -- Kevin MacLachlan -- 4/28/08 12:26p.m.

thanks -- Byron -- 4/28/08 3:36p.m.

dagger board -- AJ -- 4/29/08 7:51p.m.

Daggerboard -- Howard Staley, N24 -- 5/9/08 2:31p.m.

Post Response

Your Name:

Your E-Mail Address:

Subject:

Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:

Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:
You may upload a file to our server by clicking here.

Optional Image URL:

Please type these four characters into the field below. Do not enter spaces, just numbers and letters.

Newport Gloucester Neptune Forum is maintained by SailboatOwners.com with WebBBS 5.12.