Mast raising made easy

Posted By: Craig Poole, m/s Jack B. Nimble, Wilmington, De.
Date: 4/28/07 5:18p.m.

Report: outside forum guidelines

Well, I raised my mast today in anticipation of a Monday launch. After last years 3 person trials and tribulations, I decided to make matters a bit more easier. It's amazing what a fulcrum can do.
All for the lofty cost of two 1"x2"x10's at the local home depot plus some lashing cord for an X at one end and lashing down the other ends on deck. Hooked a line from the X to the trailering hole on the mast and then webbing from the trailer winch to the other end.
Hauled away on the winch which hauled the mast up as nice and easy as pie. The added advantage was I could stop half way up and straighten out a few twisted fittings before they could bend. From start to finish it probably took me all of about 30 mins (alone)! Now I know it will not be such a big deal from now on.
Hurray.

Messages In This Thread

Mast raising made easy -- Craig Poole, m/s Jack B. Nimble, Wilmington, De. -- 4/28/07 5:18p.m.

mast raising -- Rod M. WWP-19 "Spring", Nimble Vagabond "Loligo" S. Gulf Isl -- 4/29/07 10:43a.m.

How do you like your Vagabond? -- George - Melonseed skiff -- 4/29/07 2:11p.m.

Post Response

Your Name:

Your E-Mail Address:

Subject:

Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:

Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:
You may upload a file to our server by clicking here.

Optional Image URL:

Please type these four characters into the field below. Do not enter spaces, just numbers and letters.

Nimble Sailboats Forum is maintained by SailboatOwners.com with WebBBS 5.12.