Trailer Sailor Discussion Forum

The tool I used for cutting ..........

Posted By: Tom Luque / JoJoma P19
Date: 11/23/08 4:38p.m.

Report: outside forum guidelines

In Response To: Sink removal response (Rorry)

First, the link to the Koffee photo site was of my P19. I found that the Drummel with a cuttimg wheel that had harden granuels (dimonds?) cut like butter, but created ALOT of DUST. Then I bought the Fein oscillating cutter. It made very little dust because it removes very little material with the thin blade, and once you fine the right angle to hold the blade at, it moves through the fiberglass quickly. This is my prefered tool now for cutting fiberglass.
Remember to ware breathing protection for safty.

http://www.feinus.com/p/window/glassapps.htm

Messages In This Thread

Replacing Keel Raising Cable -- John Stacey -- 11/15/08 7:35a.m.

Cable Replacement -- JerryRocker P19 # 857 "Sarah J" Glenmoore PA -- 11/15/08 9:30a.m.

Keel raising cable/blocks -- Eric Anderson -- 11/16/08 9:55a.m.

You can leave the winch in place in the stern... -- Eric, P-19, #1221 Austin, TX -- 11/16/08 12:04p.m.

Easy to do -- Charlie Champagne WWP 19 Hafvila Boonton, NJ -- 11/16/08 1:29p.m.

Sink removal response -- Rorry -- 11/17/08 7:59a.m.

Sink removal -- David White -- 11/17/08 6:40p.m.

Sink Removal -- Rorry -- 11/19/08 7:34a.m.

Another set of photos for a different P19 -- Eric, P-19, #1221 Austin, TX -- 11/17/08 7:10p.m.

Sink -- Eric Zilbert -- 11/19/08 9:07a.m.

The tool I used for cutting .......... -- Tom Luque / JoJoma P19 -- 11/23/08 4:38p.m.

Replacing cable and winch on P19 -- keith Sisterson -- 11/16/08 12:23p.m.

If I can do it anyone can. -- Craig Cavanah, P-19 #1523, "AM TOO", Ventura County, CA -- 11/16/08 5:20p.m.

System I followed -- Charlie Champagne WWP 19 Hafvila Boonton, NJ -- 11/18/08 7:53a.m.

To post in a Trailer Sailor forum you must be logged in.

Login now
Not registered yet? Register here.

West Wight Potter Forum is maintained by SailboatOwners.com with WebBBS 5.12.