That's pretty clever, using the trailer winch without

Posted By: John - Andiamo, P23 - Geneva, Fl
Date: 7/22/08 8:48a.m.

Report: outside forum guidelines

In Response To: Good, but you don't need the helper (link) (Tom Ray)

the trailer winch mast that Precision has on the new trailers. I wouldn't like removing the nav light though. For the single handed rigging I typically do climbing back and forth between the boat and the trailer would be a PITA so I'll stick with my Macgregor gin pole system.

Messages In This Thread

Mast Raising System -- Bob Mendes -- 7/21/08 4:32p.m.

Good, but you don't need the helper -- Tom Ray -- 7/21/08 5:52p.m.

That's pretty clever, using the trailer winch without -- John - Andiamo, P23 - Geneva, Fl -- 7/22/08 8:48a.m.

You can make a plywood mount for a roller to sit on the bow pulpit -- Rob - P-21 Windance, Glen-L Minuet - Double Nickel -- 7/22/08 11:53a.m.

Ply mount for roller -- Bob Mendes -- 7/22/08 1:49p.m.

when I made mine I was more worried about the pulpit bending -- Rob - P-21 Windance, Glen-L Minuet - Double Nickel -- 7/22/08 3:12p.m.

that's how I did it -- Terry Dwyer -- 7/22/08 7:06a.m.

Post Response

Your Name:

Your E-Mail Address:

Subject:

Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:

Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:
You may upload a file to our server by clicking here.

Optional Image URL:

Please type these four characters into the field below. Do not enter spaces, just numbers and letters.

Precision Sailboats Forum is maintained by SailboatOwners.com with WebBBS 5.12.