Precision Forum
Home Forums Search Boat Show TSBB Roster Chandlery Events Classifieds Resources More Fun About TSBB	Instructions/FAQ | Rules & Etiquette | Clear Cookies View Thread | Post Response | Return to Index | Read Prev Msg | Read Next Msg | when I made mine I was more worried about the pulpit bending Posted By: Rob - P-21 Windance, Glen-L Minuet - Double Nickel Date: 7/22/08 3:12p.m. Report: outside forum guidelines In Response To: Ply mount for roller (Bob Mendes) than the plywood breaking, but then it was a prototype, and I usually have a second pair of hands to raise and lower the mast so, I have not needed to torture test it.

Messages In This Thread

Mast Raising System -- Bob Mendes -- 7/21/08 4:32p.m.

Good, but you don't need the helper -- Tom Ray -- 7/21/08 5:52p.m.

That's pretty clever, using the trailer winch without -- John - Andiamo, P23 - Geneva, Fl -- 7/22/08 8:48a.m.

You can make a plywood mount for a roller to sit on the bow pulpit -- Rob - P-21 Windance, Glen-L Minuet - Double Nickel -- 7/22/08 11:53a.m.

Ply mount for roller -- Bob Mendes -- 7/22/08 1:49p.m.

 when I made mine I was more worried about the pulpit bending  -- Rob - P-21 Windance, Glen-L Minuet - Double Nickel -- 7/22/08 3:12p.m.

that's how I did it -- Terry Dwyer -- 7/22/08 7:06a.m.

 

Post Response
Your Name:
Your E-Mail Address:
Subject:
Message Is your topic political? If so, be sure you're posting in The Political Corner
Click here for help on smiley faces and formatting codes If you'd like to include a link to another page with your message, please provide both the URL address and the title of the page:
Optional Link URL:
Optional Link Title:
If you'd like to include an image (picture) with your message, please provide the URL address of the image file: You may upload a file to our server by clicking here.
Optional Image URL:
Please type these four characters into the field below. Do not enter spaces, just numbers and letters.