Trailer Sailor Discussion Forum
Home Forums Search Trailer Sailor Roster Chandlery Events Classifieds Resources About TSBB SBO Sites	Instructions/FAQ | Rules & Etiquette | Edit Profile | Forum Login View Thread | Post Response | Return to Index | Read Prev Msg | Read Next Msg | Ok, how about the screw holes? Posted By: Tim Sharpe P21 "JennyLyn" Date: 5/11/09 2:03p.m. Report: outside forum guidelines In Response To: rebedding stanchions (Tim Sharpe P21 "Jenny Lyn") I got the deck looking pretty good- used a razor, followed by Anti-bond and then washed with acetone. Here's the next question: Do you have any tricks to cleaning out the holes? I pulled out what I could grab with a needle-nose pliers, and then scraped a bit with the auger blade on my Swiss army knife, but I didn't want to destroy the threads, so it was only marginally clean. Any suggestions?

Messages In This Thread

rebedding stanchions -- Tim Sharpe P21 "Jenny Lyn" -- 5/10/09 10:43a.m.

Rebedding cleanup -- Tim Dokken -- 5/10/09 10:58a.m.

Mechanical and Chemical -- GeorgeSK - P-23 "DayDream", P-15 "Pxyis" -- 5/10/09 3:24p.m.

Consider butyl ruber tape, the gray stuff used... -- catsailor -- 5/10/09 7:36p.m.

rebedding stanchions and butyl tape -- SamT -- 1/18/11 9:07a.m.

I use a single edged razor blade -- John Stevens P-23 -- 5/10/09 6:23p.m.

 Ok, how about the screw holes?  -- Tim Sharpe P21 "JennyLyn" -- 5/11/09 2:03p.m.

Anybody ever used 3M 4000? -- Tim Sharpe P21 "JennyLyn" -- 5/11/09 2:05p.m.

There are no threads in there -- John Stevens P-23 -- 5/11/09 4:38p.m.

Unless the 21 is different, -- GeorgeSK - P-23 "DayDream", P-15 "Pxyis" -- 5/11/09 5:47p.m.

Over drill the holes, Tape over, plug, the bottom -- Rick Voss Precision 21 Rosalita Iowa City -- 5/19/09 3:52p.m.