Santana/Schock Forum


sounds like your lowers are too tight

Posted By: Seth Dabney, 2023-C, Oxford, MS
Date: 8/6/07 5:06a.m.

Report: outside forum guidelines

In Response To: tension problem - when without a backstay (Paul Germain)

I haven't had the problem with the mast bending forward unless the lower shrouds were too tight. I have followed the advise given by Peter, http://bbs.trailersailor.com/forums/santanaarchives/index.cgi?read=934,pillsbury and found that everything works fine except, like George, I find it hard to attach the forstay when the top shrouds haven't been loosened. Last time I used cheater (18" of 1 1/4" pipe) for leverage on the "knife" and managed to step the mast without needing to adjust the tension. I don't know if it is smart to do it that way, but it is quicker than having to loosen the shrouds and retighten every time you step the mast.

Seth

http://bbs.trailersailor.com/forums/santanaarchives/index.cgi?read=934,pillsbury

Messages In This Thread

Spreader Bar Concerns/Questions -- Blake, Santana 2023C, Utah -- 8/2/07 9:20a.m.
Spreader Bar Concerns -- Tom B Santana 2023C, Tall Rig, Biloxi -- 8/2/07 10:35a.m.
Are you going to have a back stay? -- Seth Dabney, 2023-C, Oxford, MS -- 8/2/07 11:02a.m.
Seth, Yes. -- Blake, Santana 2023C, Utah -- 8/2/07 1:02p.m.
back stay -- Blake, Santana 2023C, Utah -- 8/5/07 2:39p.m.
no, I still have the original rigging -- Seth Dabney, 2023-C, Oxford, MS -- 8/6/07 5:05a.m.
Mast rigging -- George E. Norkus, Santana 2023A Tall, SE Michigan -- 8/2/07 12:14p.m.
Thanks -- Blake, Santana 2023C, Utah -- 8/2/07 1:07p.m.
DH2331 Spreader Bracket -- Blake, Santana 2023C, Utah -- 8/2/07 1:01p.m.
DH2331 -- Tom B Santana 2023C, Tall Rig, Biloxi -- 8/2/07 1:30p.m.
Compression Post for Spreader Brackets -- Blake, Santana 2023C, Utah -- 8/5/07 2:22p.m.
A splint? -- George E. Norkus, Santana 2023A Tall, SE Michigan -- 8/5/07 6:06p.m.
One more thing about a splint -- George E. Norkus, Santana 2023A Tall, SE Michigan -- 8/5/07 6:13p.m.
tension problem - when without a backstay -- Paul Germain -- 8/5/07 9:39p.m.
 sounds like your lowers are too tight   -- Seth Dabney, 2023-C, Oxford, MS -- 8/6/07 5:06a.m.
added extra lower shroud -- Paul Germain -- 8/5/07 9:51p.m.
let me try again -- Blake, Santana 2023C, Utah -- 8/7/07 2:48p.m.
how are you going to "fish" it into place? -- Seth Dabney, 2023-C, Oxford, MS -- 8/7/07 3:48p.m.
13 foot pole -- Blake, Santana 2023C, Utah -- 8/8/07 10:40a.m.
compression tube installation -- Tom B Santana 2023C, Tall Rig, Biloxi -- 8/8/07 2:35p.m.
Compression Tubes -- Tom B Santana 2023C, Tall Rig, Biloxi -- 8/6/07 6:21a.m.

 

Post Response

Your Name:
Your E-Mail Address:
Subject:
Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:
Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:

You may upload a file to our server by clicking here.

Optional Image URL:

Please type these four characters into the field below. Do not enter spaces, just numbers and letters.
 

 

Santana/Schock Forum is maintained by SailboatOwners.com with WebBBS 5.12.