Trailer Sailor Discussion Forum
Home Forums Search Trailer Sailor Roster Chandlery Events Classifieds Resources About TSBB SBO Sites	Instructions/FAQ | Rules & Etiquette | Edit Profile | Forum Login View Thread | Post Response | Return to Index | Read Prev Msg | Read Next Msg | I used 5200 and the screws eventually pulled out. Posted By: Seth Dabney, 2023-C, Oxford, MS Date: 3/30/08 12:21p.m. Report: outside forum guidelines In Response To: Not so sure I can pack the holes from underneath. (pic) (Gary, Santana 2023, Milwaukee) If you used a syringe to fill the screw holes with unthickened epoxy, then plugged the holes while it hardened, it would do some penetrating and you could drill new holes to line up with your new pins. You may be fine the way you are, just a thought. Seth

Messages In This Thread

Fabricating new 2023 centerboard pins. -- Gary, Santana 2023, Milwaukee -- 3/29/08 11:00a.m.

You might want to fill the holes with epoxy -- Seth Dabney, 2023-C, Oxford, MS -- 3/29/08 11:46a.m.

Not so sure I can pack the holes from underneath. -- Gary, Santana 2023, Milwaukee -- 3/29/08 8:47p.m.

Wonder -- Bob Frak 2023C Marquette Mi. -- 3/29/08 9:56p.m.

 I used 5200 and the screws eventually pulled out.  -- Seth Dabney, 2023-C, Oxford, MS -- 3/30/08 12:21p.m.

Another option -- Bob Frak -- 3/30/08 2:40p.m.

Damn, Seth, you're scary! To bad you live so far away. -- Gary, Santana 2023, Milwaukee -- 3/30/08 10:21p.m.