Trailer Sailor Discussion Forum
Home Forums Search Trailer Sailor Roster Chandlery Events Classifieds Resources About TSBB SBO Sites	Instructions/FAQ | Rules & Etiquette | Edit Profile | Forum Login View Thread | Post Response | Return to Index | Read Prev Msg | Read Next Msg | no glass on the bottom Posted By: Seth Dabney, 2023-C, Oxford, MS Date: 4/11/08 9:50p.m. Report: outside forum guidelines In Response To: Seth, found an old ZIP file from a couple years back. (Gary, Santana 2023, Milwaukee) I put grey barrier coat on the hull bottom because the previous owner thought water from the ballast tank was the cause of some small blister. Now I think it wasn't needed there (anyone else have blisters?). A boatyard said they were just gelcoat blisters and they certainly weren't deep like some I have seen on other boats. I glassed the bulkheads, that is definitely needed. I also glassed the seam between the sole and the hull, where Rudy used 5200. Picture is of forward port quarter of ballast tank before closing the tank. The guys from West said that an extra coat of epoxy would do as much good as adding the barrier coat additive. I used several coats and overlapping layers of glass on the bulkhead. Seth

Messages In This Thread

Bummer! My 2023 WB tank has not been 'glassed! -- Gary, Santana 2023A, Milwaukee -- 4/10/08 12:15p.m.

Bummer Dude -- Bob Frak -- 4/10/08 12:50p.m.

The tank will be damp, anyway, due to residual water in the tank. -- Gary, Santana 2023A, Milwaukee -- 4/10/08 1:00p.m.

Tank notes -- Bob Frak 2023C Marquette Mi. -- 4/10/08 8:13p.m.

the drawings -- Paul Germain -- 4/10/08 9:21p.m.

Drawings -- Bob Frak -- 4/11/08 10:02p.m.

Text -- Bob Frak -- 4/11/08 10:06p.m.

Text 2 -- Bob Frak -- 4/11/08 10:07p.m.

Drawings -- Bob Frak -- 4/11/08 10:08p.m.

Drawings -- Bob Frak -- 4/11/08 10:10p.m.

awesome drawings, a treasure trove -- Paul Germain -- 4/12/08 12:23a.m.

thanks for posting! -- Seth Dabney, 2023-C, Oxford, MS -- 4/11/08 10:32p.m.

Well, Bob, a couple of things. -- Gary, Santana 2023A, Milwaukee -- 4/11/08 8:55a.m.

mast support -- Seth Dabney, 2023-C, Oxford, MS -- 4/11/08 11:55a.m.

Damn, what an incredible job Tom did! -- Gary, Santana 2023A, Milwaukee -- 4/11/08 4:13p.m.

Not to butt in.... -- Bob Frak -- 4/11/08 9:36p.m.

And then I read... -- Bob Frak -- 4/11/08 9:45p.m.

But me no but's, brother! -- Gary, Santana 2023A, Milwaukee -- 4/14/08 8:17a.m.

like Frank said, always use hardner -- Seth Dabney, 2023-C, Oxford, MS -- 4/11/08 9:55p.m.

Alternative Ballast Tank Coating -- Tom, 2023A, Coupeville WA -- 4/12/08 5:30p.m.

Good, God, Tom, that stuff sounds incredible! -- Gary, Santana 2023A, Milwaukee -- 4/14/08 9:10a.m.

Seth, found an old ZIP file from a couple years back. -- Gary, Santana 2023, Milwaukee -- 4/11/08 9:05p.m.

 no glass on the bottom   -- Seth Dabney, 2023-C, Oxford, MS -- 4/11/08 9:50p.m.

mast support -- Seth Dabney, 2023-C, Oxford, MS -- 4/11/08 10:04p.m.

Mast support materal -- Bob Frak -- 4/11/08 10:28p.m.

That would work. -- Gary, Santana 2023A, Milwaukee -- 4/14/08 8:25a.m.

Seth, you wrote: -- Gary, Santana 2023A, Milwaukee -- 4/14/08 8:22a.m.

rear bulkhead -- Seth Dabney, 2023-C, Oxford, MS -- 4/11/08 10:18p.m.

I feel your pain. It'd break my heart, it leaking after all that work. -- Gary, Santana 2023A, Milwaukee -- 4/14/08 8:30a.m.