Santana/Schock Forum


Liv, don't be offering my services out (unless it's a hot friend of yours)

Posted By: Gary, Santana 2023, Milwaukee
Date: 5/18/08 2:13p.m.

Report: outside forum guidelines

In Response To: Awesome job (Liv, CS22, Karma 22, Ottawa River)

Got to get her done, give her a couple of shakedown cruises before heading up in Canada to meet up with you guys in Spanish. I'll probably pull into Spanish around noon on Friday, July 11th. Is that good for you guys, or should I wait a week? (assuming Sushi is done, of course).

Messages In This Thread

Santana 2023 WB Tank: fiberglass 101 -- Gary, Santana 2023, Milwaukee -- 5/13/08 10:46p.m.
Filling the port & starboard seams -- Gary, Santana 2023, Milwaukee -- 5/13/08 10:56p.m.
Oops! Wrong pic above, here it is... I hope! -- Gary, Santana 2023, Milwaukee -- 5/13/08 11:08p.m.
Aft Starboard corner, though they all look similar. -- Gary, Santana 2023, Milwaukee -- 5/13/08 11:20p.m.
overview of a bulkhead in progress -- Gary, Santana 2023, Milwaukee -- 5/13/08 11:27p.m.
broken corner of removed sole piece, repaired and sanded -- Gary, Santana 2023, Milwaukee -- 5/13/08 11:34p.m.
Overview of completed bulkhead -- Gary, Santana 2023, Milwaukee -- 5/20/08 11:09p.m.
you're getting good at this, eh? -- Seth Dabney, 2023-C, Oxford, MS -- 5/16/08 5:07a.m.
Only half as good as you, Seth. Thanks for your help. -- Gary, Santana 2023, Milwaukee -- 5/17/08 3:03p.m.
A completed (covered) corner. -- Gary, Santana 2023, Milwaukee -- 5/20/08 11:17p.m.
I am well pleased with my finished seams. -- Gary, Santana 2023, Milwaukee -- 5/20/08 3:15p.m.
You get the prize... -- Tom Cannon, 2023A, Coupeville WA -- 5/20/08 3:50p.m.
I know what you're REALLY saying, Tom! -- Gary, Santana 2023, Milwaukee -- 5/20/08 10:45p.m.
That's pretty much what I did. -- Seth Dabney, 2023-C, Oxford, MS -- 5/20/08 5:24p.m.
OK Seth -- Bob Frak -- 5/20/08 7:45p.m.
only one of two pieces had been put back -- Seth Dabney, 2023-C, Oxford, MS -- 5/21/08 1:18p.m.
Did you use straight 5200 the length of your trunk? -- Gary, Santana 2023, Milwaukee -- 5/21/08 6:08p.m.
To do what? I didn't use any? -- Seth Dabney, 2023-C, Oxford, MS -- 5/21/08 9:21p.m.
Your immediate reply, third pic from the bottom, may answer it. -- Gary, Santana 2023A, Milwaukee -- 5/22/08 7:16a.m.
Gary / itchy -- Bob Frak -- 5/22/08 8:11p.m.
Hey, Bob. Well, easy to 'jump' on the epoxy/glass, but -- Gary, Santana 2023A, Milwaukee -- 5/23/08 7:41a.m.
Maybe?? -- Bob Frak -- 5/23/08 11:51a.m.
Also, your last picture suprised me. -- Gary, Santana 2023A, Milwaukee -- 5/22/08 7:20a.m.
What you see on the trunk is the rigit hard putty -- Seth Dabney, 2023-C, Oxford, MS -- 5/22/08 3:21p.m.
Ah, understood. -- Gary, Santana 2023A, Milwaukee -- 5/23/08 7:56a.m.
I was told on the main board to epoxy the screws in. -- Todd-2023C-SFBay -- 5/24/08 8:18p.m.
Don't be so sure, Todd. Not as easy as 'they' make it sound. -- Gary, Santana 2023, Milwaukee -- 5/25/08 7:57p.m.
I'm humbled, Seth. Awesome work. Here's a great tool I discovered. -- Gary, Santana 2023, Milwaukee -- 5/20/08 10:42p.m.
Same seam, couple hours later, completed. -- Gary, Santana 2023, Milwaukee -- 5/20/08 11:02p.m.
Framing the Edge-Out -- Gary, Santana 2023, Milwaukee -- 5/17/08 3:15p.m.
Giving you a close up here, because... -- Gary, Santana 2023, Milwaukee -- 5/17/08 3:35p.m.
Nothing of major interest here. -- Gary, Santana 2023, Milwaukee -- 5/17/08 4:09p.m.
Awesome job -- Liv, CS22, Karma 22, Ottawa River -- 5/18/08 5:32a.m.
 Liv, don't be offering my services out (unless it's a hot friend of yours)   -- Gary, Santana 2023, Milwaukee -- 5/18/08 2:13p.m.
Are you going to glass the underside of the edge outs? -- Seth Dabney, 2023-C, Oxford, MS -- 5/18/08 12:34p.m.
If I understand you, Seth, maybe this will clear it up? -- Gary, Santana 2023, Milwaukee -- 5/18/08 2:26p.m.
Seth, after a little sleep, here's the better answer! -- Gary, Santana 2023A, Milwaukee -- 5/19/08 6:23a.m.
A dry fitting. Just checking things out. -- Gary, Santana 2023, Milwaukee -- 5/20/08 10:53p.m.

 

Post Response

Your Name:
Your E-Mail Address:
Subject:
Message

Is your topic political? If so, be sure you're posting in The Political Corner

Click here for help on smiley faces and formatting codes

If you'd like to include a link to another page with your message,
please provide both the URL address and the title of the page:

Optional Link URL:
Optional Link Title:

If you'd like to include an image (picture) with your message,
please provide the URL address of the image file:

You may upload a file to our server by clicking here.

Optional Image URL:

Please type these four characters into the field below. Do not enter spaces, just numbers and letters.
 

 

Santana/Schock Forum is maintained by SailboatOwners.com with WebBBS 5.12.